页面正在加载中
请稍候...
由于PERFORM-3D的建模非常复杂,所以我开发了一个ETABS TO PERFORM-3D的前处理,可以实现在ETABS建立几何模型,再通过我开发的前处理系统输入配筋与纤维截面划分,再导入PERFORM-3D完成非线性模型。
ETABS TO PERFORM-3D 模型转换程序
Author: dinochen1983
Time: 2009-07-15
ETABS TO ENGINEER V1.0,自编ETABS后处理程序
ETABS后处理程序ETABS TO ENGINEER V1.0
Author: dinochen1983
Time: 2009-07-15
为更好的推广弹塑性分析方法,现推出免注册费申请IDRAC2D前后处理的正式版活动。请将你用IDARC进行的科研课题简介,研究单位等信息及IDARC-2D正式版的注册号发到我的邮箱,即可获得IDRAC的正式版注册码。我的邮箱是dinochen1983@yahoo.com.cn。以下代号名单为已免费申请正式版,赶快行动吧!!!
IDARC-2D 前后处理系统 v1.0
Author: dinochen1983
Time: 2009-07-15

[论文]高层建筑结构风振时程分析软件的技术研究


高层建筑结构风振时程分析软件的技术研究
陈学伟1,韩小雷1,2,郑宜1,毛贵牛1
(1. 华南理工大学高层建筑结构研究所 广州 510640;2.华南理工大学亚热带建筑科学国家重点实验室 广州 510640)
摘  要:高层建筑风振舒适度已受到普遍关注,目前常采用的是规范的经验公式和风洞模型试验实测法。但随着结构体系的复杂化及采用附加阻尼器减振技术的日益广泛化,进行结构的风振时程分析是更为简单直接和准确的分析方法。本文采用自回归滤波法技术,考虑三维空间相关性,对具有随机性的脉动风荷载进行有效的模拟;通过编制软件生成风压时程数据并自动输出至结构有限元软件进行风振时程分析,为高层建筑的风振控制分析提供了可行的方法;最后,将该风动力荷载数值模拟技术与动力时程分析技术相结合进行算例分析验证,经过对比研究表明该风振时程分析方法可应用于工程分析与设计。
关键词:风振控制;风荷载时程;时程分析;自回归滤波法
中图分类号:TU97   文献标识码:A    文章编号:
The Research of Time-History Response Analysis of Tall Building Structure Under Wind-induced Vibration and Computer Program for Wind Time-History Load Simulation
Chen Xuewei1, Han Xiaolei1,2, Jack CHEANG1, Mao Guiniu1
(1.Tall Building Structure Research Institute, College of Architecture and Civil Engineering, South China University of Technology, Guangzhou 510640, China;
  2.State Key Laboratory of Subtropical Architecture Science, South China University of Technology, Guangzhou 510640, China)
Abstract:Wind-induced comfort problems of tall building have raised more and more attention, empirical formulas from design codes and wind tunnel experiment method are widely use nowadays. However, as the complicate structure systems and especially structures with viscous dampers are widely applied, wind load time-history analysis method is more precise. In this paper, auto-regressive method is used to simulate the random wind dynamic loads which considers 3D spatial correlation. The computer program is developed to produce wind load time-history and export to FEM program to carry out the time-history analysis under wind-induced vibration. The program provides feasible method for analysis of wind-induced vibration of tall building structure .The proposed method was applied in numerical simulation of several typical examples. The results verify the effectiveness of this simulation method in practical structural analysis.
Keywords:wind-induced vibration control; wind load time-history; time-history analysis; auto-regressive.



[本日志由 dinochen1983 于 2010-07-13 03:20 PM 编辑]
文章来自: 本站原创
引用通告: 查看所有引用 | 我要引用此文章
Tags: 论文 抗风 编程 ETABS
评论: 0 | 引用: 0 | 查看次数: 1753
发表评论
昵 称:
密 码: 游客发言不需要密码.
验证码: =0+2
内 容:
选 项:
虽然发表评论不用注册,但是为了保护您的发言权,建议您注册帐号.
字数限制 2000 字 | UBB代码 开启 | [img]标签 开启
?